4PCS Pre-Programmed TPMS Sensor Tire Pressure Monitoring Sensor Toyota Sequoia 08-17 Sienna 06-20 Tundra 06-17 315Mhz

<p>Why We Need to Use TPMS Sensor?<br>TPMS is designed to monitor the air pressure in a tire and send a warning to the vehicle’s onboard monitoring system when the pressure drops below a preset limit. TPMS sensor can help improve ride and handling, reduce stopping distances, and the potential for hydroplaning. Tire pressure sensors can also increase fuel efficiency and extend tire life.</p> <p>Replace OE Number：426070C070,4260708010,426070C050,426070C080,426070C060,529332F000,529333X205<br>,426070C030,426070C040,426070C0500</p> <p>Specification:<br>Frequency: 315MHz<br>Pressure Monitoring Range: 100 – 900kPa<br>Operating Temperature: -40℉~257℉ / -40℃ ~+125℃<br>Electric Current:Static≤4uA\Instantaneous emissions≤3.3mA<br>Battery Life: ≥5 yearsBattery Voltage: 2.3-3.6V<br>Pressure Reading Accuracy: ±2 kPa<br>Installation Type：Snap In</p> <p>Package included:<br>4Pcs Tire Pressure Sensor</p> <p>Compatible with the Following Vehicles：<br>（Please refer to the product detail image）</p> <p>Optimized Installation Process:<br>1.Deflate the Tire:<br>Remove the valve cap and core to fully deflate the tire.<br>2.Dismount the Tire:<br>Secure the tire onto the tire changer and position the valve at the 1 o’clock position relative to the tire separation head. Use a tire tool to lift the bead over the mounting head and dismount the tire.<br>3.Remove the Sensor:<br>Using a screwdriver, remove the fastening screw and sensor from the valve stem. Then loosen the nut and completely remove the valve.<br>4.Install the Sensor and Valve:<br>Insert the valve stem through the valve hole on the rim. Secure the screw-nut with a torque of 4.0 Nm using a positioning pin for alignment. Attach the sensor body against the rim and tighten the mounting screw.<br>5.Mount the Tire:<br>Position the tire onto the rim, ensuring the valve is oriented 180 degrees opposite the separation head. Carefully seat the tire bead over the rim edge.<br><br><br><br><br><br></p>

• 【FITMENT/COMPATIBILITY】 HMCYCI tire pressure sensor fit for HYUNDAI/KIA/TOYOTA, Please refer to the product detail image
• 【OEM Part Number】Pre-programmed tpms sensors direct-Fit OE replacement sensor,Replacing OE numbers are 426070C070.4260708010.426070C050.426070C080.426070C060.529332F000.529333X205
• 【Professional Testing】Each TPMS is tested before leaving the factory to ensure trouble-free installation and performance. We provide a one-year warranty on our products, if you encounter problems, please contact us
• 【NO SENSOR PROGRAMMING REQUIRED 】The tire pressure monitor system (TPMS) come pre-programmed specifically for your make/model/year of vehicle,will instantly registered to the truck TPMS monitoring by themselves after mounted the new wheels and tires and took a test drive
• 【HIGH QUANLITY】High performance Cr2032 battery and 900kpa chip.Battery is made to last up to 10 years of normal use,and can withstand 40 degrees low temperature,125 degrees high temperature.