ADT-Link M.2 NVMe SSD Extension Cable Support PCI-E 3.0 x4 Full Speed 32G/BPS 90 Degree (20cm,R44NF)

ADT-LINK M.2 NVMe SSD Extension Cable Support PCI-E 3.0 x4 Full Speed 32G/bps 90 Degree Product Detail: Product name: M.2 NVMe Key M extension cable Product model: R44UF, R44NF, R44MF Transfer speed: PCIe3.0 x4 full speed, 32G/bps (Max.) Wire length: 10 ~ 100 cm, the length can be customized. Cable Length : The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector. Product Features: 1. Differential signal without over-hole design, there is no parasitic capacitance and parasitic inductance of signal attenuation interference problems, not to mention the CAF micro-short circuit phenomenon, the product is durable. 2. PCB shortening and fattening design, shortening will not be stuck to the graphics card, fattening and lengthening design makes the board easier to install, reducing the chance of damage. WarmTips: 1. Plug the cable must identify the direction, do not insert the reverse or insert the offset position, to prevent burning equipment, plug the line first hold the device socket and then plug the line, to avoid excessive force will be plugged off the socket pins. 2. Graphics card or motherboard is an electronic product, will increase with time and aging oxidation, does not support the old equipment. More than 3 years, do not recommend the purchase. 3. If your SSD is a two-notch SATA SSD, not compatible. Support one notch M-key NVMe SSD; do not support two notch BM-key SATA SSD.

• Differential Signal Without Over-hole Design-- There is no parasitic capacitance and parasitic inductance of signal attenuation interference problems, not to mention the CAF micro-short circuit phenomenon, the cable is durable.
• Cable Application-- M.2 NVMe SSD cards extension, only suitable for use with internal graphics cards in the case. Support one notch M-key NVMe SSD; do not support two notch BM-key SATA SSD. If your SSD is a two-notch SATA SSD, it is not compatible.
• Transfer Speed-- PCIe3.0 x4 full speed, 32G/bps (Max.). The cable length within 60 cm supports PCIe3.0 full speed.
• High Quality Cable-- The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.
• Warm Tips-- Identify the direction before Plug the cable, do not insert the reverse or insert the offset position, to prevent burning equipment, plug the line first hold the device socket and then plug the line, to avoid excessive force will be plugged off the socket pins.