Front End Suspension Master Rebuild Kit Idler Arm Compatible with Chevrolet Chevelle/El Camino OEM Spec Replacements (27 Piece Kit)

This Kit is constructed using High-Quality OEM spec replacements for 1964 Chevrolet Chevelles, El Caminos. These parts are Factory Design and will only work with Stock Vehicles. This Kit Contains All Of The Pieces Below: Inner Tie Rod Ends (Right and Left), Outer Tie Rod Ends (Right and Left), Tie Rod Sleeves (2 Each), Sway Bar Links (2 Each), Sway Bar Bushings (2 Each) - 17.5 mm (0.68 Inch), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Upper Control Arm Bushings (4 Each), Lower Control Arm Bushings (4 Each) - 1st Design, Upper Control Arm Bumpers (2 Each), Lower Control Arm Bumpers (2 Each), and Idler Arm. This Kit Also Contains The Cotter Pins, Rubber Grease Seals/boots, Zerk Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.

• YEARS: 1964
• MODELS: Compatible with Chevrolet Chevelles and El Caminos
• HIGH-QUALITY: OEM Spec Replacements
• INCLUDED IN THE 27 PIECE KIT: Inner Tie Rods (2 Each), Outer Tie Rods (2 Each), Tie Rod Sleeves (2 Each), Sway Bar Links (2 Each), Sway Bar Bushings (2 Each) - 17.5 mm (0.68 Inch), Upper Control Arm Bushings (4 Each), Lower Control Arm Bushings (4 Each) - 1st Design, Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Upper Control Arm Bumpers (2 Each), Lower Control Arm Bumpers (2 Each), Idler Arm
• ALSO CONTAINS: The Cotter Pins, Rubber Grease Seals/boots, Zerk Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.