New Arrivals/Restock

This magnetic drive pump is the ideal pump is the same one that we use in the RoboBrew Gen 3 or BrewZilla Gen 3.1 to 3.1.1 in both the 35L and 65L models. Capable of withstanding temperatures up to 120°C it can handle the boil directly without the need to cool before use. Extremely efficient well under 1 amp this pump can be run continuously at elevated temperatures. 

Putting pressure from restrictive flow will not hurt a magnetically driven pump, it is precisely what this baby is used for.
It is not self priming, so it will need to be lower than the vessel primed with liquid before it can push it around. It is not submersible!

The input and output of the pump are 14mm OD so this will allow you to hook up silicon hose (port KL06873) directly to the pump and secure with hose clamp.

This pump is not self priming, so it will need to be lower than the vessel primed with liquid before it can push it around. It is not submersible!

This pump also comes un-wired.  So it's ready to install into your own brewery or replace the RoboBrew/BrewZilla pump if you need to for some reason.

If you have  Generation 5 Generation 3.1 to 3.1.1 BrewZilla please select the replacement pump below.
KL24341 - Replacement 6 Watt Magnetic Drive Pump for BrewZilla Gen 4

Specifications:
Voltage: 220-240 at 50-60hz
Specifications: Max Head: 2.1m(at 240v)
Specifications: Max Flow: 12L/min )at 240v)
Input and Output size: 14mm OD (to suit hose with ID 11-13mm)

We recommend to not run the pump dry for too long as it may impede future performance.